Monday, March 27, 2017

Crisscross Solo Blems


Just a heads up in case you're in the market for a Crisscross Solo and you're coming to Handworks.
We'll have a few blems available at the event for a discount price of $79. We usually don't have to offer blems or seconds because we usually catch them early on in the process. This time a few Crisscross arms made it all the way through powder coating. Here's the issue with these. During the casting process the moulds get transported from the mould-making area to the pouring deck and every now and then a mould gets jarred and makes the lines in the castings you see above. It's completely cosmetic. The arms function as intended. A few of the arms got the royal treatment at the powder coaters as well. The middle one above shows the result. You may need to run a file or drill bit through the holes to get the pins to pass. These will be priced at $79 and are available only at Handworks. If we have leftovers, we'll post them here for sale after all the hubbub is over.

Friday, March 24, 2017

The Benchcrafted Swing Away Seat


After over a year of development, we're excited to announce pricing and availability of our Swing Away Seat!

But first a few words about this product in case some of you are wondering what road we're headed down. When we started Benchcrafted it all began with a product that, although made of wood, was not a woodworking tool. The Mag-Blok. Only after we got a wild hair to build a new workbench for our shop did we take the leap in manufacturing our own woodworking vises. So, although we've become known as the "men of vise" we have our roots in making stuff we like to use, period. The other tools in our line reflect that philosophy too. We use everything we make, often on a daily basis. The Swing Away Seat is no different. And it just so happens that it's an incredible workbench accessory as well.

In early 2012 we began researching these seats after discovering a vintage example at a local food market. We were intrigued by the whole concept. How sweet would it be to have a seat for your bench that was always there, but also "never" there? We began compiling designs and searching the old patent record. Fast forward to last year. Prodded by our customers, we decided to put the Swing Away Seat at the head of the line. As is typical, it took way longer than we anticipated to complete the first run. A dead simple device, but there's more here than meets the eye. We also wanted to spend some time designing the thing so it didn't only look like something old.



The Swing Away Seat is cast in gray iron and powder coated in satin black. When you buy the seat you'll receive two castings: the larger part called the mount, and the smaller part which bolts to your bench, called the bracket. You'll also receive two black oxide-finished steel pins that marry the parts together. They are loose pins, just like you'd find in a door hinge. So if you need to remove the mount from the bench for whatever reason, you simply lift the two pins and the mount comes off.

Mounting the seat to your bench or table is easy with two 1/2" lag screws or through bolts. Bolts are the stronger option, and if you've got 2" or less of wood to bite into, we recommend bolts. Lag screws, driven into properly-sized pilot holes in hardwood are extremely strong. However, since we can't control your mounting situation, we can only make general suggestions. As such, the Swing Away seat does not come with mounting hardware. Beware of hardware store and home-center lag screws. They are usually total junk with soft steel and shallow threads. We source ours from the excellent Blacksmithbolt.com. The 1/2" square head lags in black oxide work very well with the Swing Away seat. We also recommend their rub washers under the head of lag screws for a smooth connection. These aren't so necessary with through bolts.



The Swing Away seat will be offered two ways. Castings only, for us woodworkers who want to make our own seats, or packaged with a finished, ready to mount wood seat. The wood will be offered in one species only, quartersawn white oak with a chestnut stain and satin lacquer finish. The seat is 11" in diameter and 1" thick. Each wood seat will include three screws to attach it to the mount.


Like our vises, the Swing Away seat is overbuilt. We haven't done any testing on how much weight the casting can take before it breaks, but our empirical knowledge tells us its more than anyone need worry about. Since the seat is cantilevered off its mounting surface, one does have to be mindful of the mounting structure. Obviously a free-standing structure could be prone to tipping, depending on the weight of the structure and the sitter. Again, there are lots of variables at play here that we can't possibly anticipate. Our Classic Workbench (pictured here) is not a super heavy bench, being somewhat narrow at 20" with a 3" thick top. Yet it supports a 250 pound body (me) without tipping.  If you're planning to use one of these on any free standing object, keep this in mind.

The Swing Away seat will pivot a bit over 180 degrees in total.

Pricing and Availablity

The Swing Away seat will be available initially at Handworks in Amana, IA, May 19-20. After the event is over, we'll post them to the website where they can be ordered any time. The Swing Away seat will be a stock item. We won't be taking pre-orders or deposits for the seats we sell at Handworks or later online. If you want to make sure you get one of the first ones, be at our space in the Festhalle Barn first thing Friday morning, May 19. We'll take credit cards, but cash will get you in and out of our space much quicker. Unfortunately we can't reserve a seat for you before the doors open, or hold one after you've paid. You'll want to take your seat back to your vehicle immediately since they are a tad on the heavy side. We will have both the seat only, and seats with wood for sale. We'll have several seats mounted to benches for you to try out at Handworks.

The Swing Away seat is $199.

The Swing Away seat with wood is $249.

See you in Amana...