Showing posts with label Split-Top Roubo. Show all posts
Showing posts with label Split-Top Roubo. Show all posts

Monday, May 21, 2018

Mark's Roubo By Hand


Here is my finished bench and I am very happy with it! I’m pretty new at this and don’t own a power jointer or planer - so - I had plenty of hand planing to complete this. At the end of the day, I’m thankful because I am very comfortable with four squaring large pieces as well as flattening a large top with only hand tools. I used 2 x 12 SYP construction lumber. I tried to end up with primarily rift sawn lumber to avoid the large “cathedral grain” flat sawn boards and no knots. I did pretty well with this except for the sliding deadman. That was my last part and I was out of lumber...LOL
 
My first project on my bench was the gap stop. Oh what a blessing it is to use such a fine bench. I didn’t even know what I was missing.
 
Thanks John and Jameel - I appreciate your products. I hope to make many fine pieces of furniture for my family and friends. And also make plenty of memories next to my new bench. Love it!!!!
 
Mark Ortiz


 

Monday, February 20, 2017

Build A Bench with Jeff Miller this April



If you'd like to spend a couple weekends building a Roubo-style bench with Jeff Miller, here's your chance.

Over two weekends (March 31-April 2, and April 7-9) Jeff is offering the class at his shop in Chicago where you'll get instruction from one of today's best modern furniture makers. Jeff has extensive experience building this bench, and installing our vises. Most of the benches in Jeff's shop are outfitted with our stuff, and he has an intimate knowledge of how they install and function. Although Jeff will help you build a bench with whatever vises you wish, not just our stuff.

Jeff is also one of our favorite people. Always good-humored and cheery, two weekends with Jeff building stuff sounds like serious fun. And you'll walk away with not only a fine bench, but also a bunch of new skills and techniques.

For more info, see Jeff's website here. http://www.furnituremaking.com/workshophome.html

Photo by Narayan Nayar at FORP II.

Wednesday, December 7, 2016

Planing Stop in the Split Top Roubo

A customer recently asked where to install his Benchcrafted Planing Stop in his Split Top Roubo, as the Split Top Roubo plans do not include the planing stop.

Here's where we recommend you install the stop: between the two dogs immediately to the left of the leg vise. You'll have to move the stop a little inboard (that is, a bit past the 2-3/4" we show in the planing stop instructions) to allow some space between the stop's stock and the dogs. We don't show any dimensions because your bench may be different. Here's the basic idea behind finding the right spot. You don't want to get the stop too close to the dogs, and at the same time you don't want it too close to the leg either so it doesn't end up behind your potentially-wider leg vise chop, making adjustment annoying.



Tuesday, October 11, 2016

Aaron Moore's Compact Bench



Aaron Moore of Walke Moore Tools sent us pics of his bench that he built for demoing tools at woodworking shows. It was sized to fit in the back of the Walke Moore Tools show van.

Moore's bench is a good example of a short, simple bench that is quick and easy to build. Only 72" long, with a 2 1/2" thick top, about the only thing we'd change is to add a planing stop. And with our's available in the next day or so, Aaron will have his chance (hint!)

The bench features our Glide M, and a very understated yet classy black milk paint finish on the base and chop. We especially like the patined arris on the chop, with the hard maple showing through. Gives the bench a bit of the vector graphics look (Vectrex anyone?)

Hope you bring the bench to Handworks next year, Aaron.







Monday, August 22, 2016

An Elegant, Simple Bench in Walnut


Craig Thibodeau of CT Fine Furniture recently sent in these pictures of his minimalist split-top workbench in walnut, featuring our Glide C leg vise.

"Here are the photos of my split top Roubo with your vise hardware.  It's not quite as clean as it was a few months ago but it has been serving me well and is naturally starting to show some of the inevitable marks of regular use.  Best thing I've done for my shop in a long time."

Craig had the following to say about his bench, from his Instagram:

"And of course the main feature of this space is my split top Roubo bench with the @benchcrafted criss cross leg vise. I still find it amazing how useful this bench/vise combo has been over the past few months. I'm glad I waited so long before building a bench so I could really fine tune it to my way of working.
I'm definitely not a proponent of making a workbench as your first woodworking project. I think you need to get some time in doing some woodworking first so you can learn what type of work you want to do and how you like to work. Plus building a good quality bench is not a beginner project, it's big and heavy and takes big equipment to prep the materials properly unless your a hand tool only guy. Just my opinion of course."


"Since I had the camera out I took a few more pictures of my Roubo bench just for fun. Here's a decent shot of the @benchcrafted criss cross leg vise hardware. I'm still amazed how well the leg vise works, especially when combined with the sliding deadman. Super strong holding of workpieces with almost no effort, on my old vice I had to crank down on the handle to hold parts tight but with this one just a light turn of the handle locks pieces in place. That and the hardware really does look kind of cool. I sprayed my handle/wheel with flat black paint before assembly and left off the wooden ships wheel knobs it came with, they didn't seem necessary to me. No affiliation with Benchcrafted of course but I do like their hardware."







Don't let the simplicity of Craig's bench fool you. Craig is a master furniture maker, which makes the simplicity of the bench so satisfying. Many beginning woodworkers struggle with the minutiae of bench design, not knowing exactly what they want in a bench and vises. And that's where our bench plans come in. They've all been vetted by furniture makers with decades of experience. So chances are, if you've not got a lot of experience, building one of our benches will all but guarantee satisfaction.

But we don't want to make this post about us. So enjoy this video of one of Craig's pieces.


Tuesday, April 12, 2016

Unsolicited

Hi,

You probably receive several of these a day, but I wanted to say thanks for the excellent hardware and bench plans.  Like many out there, I used Marc Spagnuolo's video series on his Guild site as well.

 
Walnut was 12/4 I got from a small hardwood dealer in New Hampshire, base was 12/4 and 8/4 hard maple I bought wet from a guy in Massachusetts and air-dried stickered in my basement for 30 months, and the top is from 8/4 soft maple I got from Downes and Reader Hardwood in Stoughton, MA (http://www.downesandreader.com).

I’ve been woodworking for a while, but the condor tails were the first dovetails I ever made.

I’m looking forward to years of heavy use - it will drastically change the way I woodwork.  Also looking forward to the new Moxon hardware, and the other products you announced in a blog post recently.

Thanks,

Nick Carruthers
Providence, RI






Monday, February 29, 2016

Watch William Ng Make Condor Tails

William Ng recently outfitted his entire school with new benches featuring our hardware. William produced this video showing how he set up for making a production run of Condor tails for the end caps. This is similar to the technique we use, but a little more production oriented. If you've got a bunch to make, or just enjoy using machines, William's method is excellent. It's a fun watch too, William's got a good sense of humor.
 

Monday, December 14, 2015

Big Red Oak: Will Myers Shares His Source





FORP Enthusiast Will Myers dropped us a line last week to let us know of a sawmill that's cutting some large American red oaks into thick slab-style workbench kits. These would be ideal for quickly building our Split-Top Roubo, or any Roubo-style bench for that matter. This is the sawmill that Will uses when he teaches his Moravian bench at The Woodwright's School.

These bench kits are super simple. A single slab top and stock for the legs and rails. That's it. Will says be aware that the wood is wet. As in freshly cut and very green. You won't be able to build a bench with this stock for a couple years at least. And longer if you can stand it.

We don't get any kickbacks from these kits, and neither does Will (in his own words: "I would like for them not to become pallets more than anything") We're simply passing on the tip from Will. These look to be beautifully clear and straight. If you're in the market for one of these you'll be supporting a small family sawmill in rural North Carolina. Thanks for sharing, Will.

For more info, click here.






Saturday, October 10, 2015

William Ng Cranks Out Some Roubo


William Ng (http://wnwoodworkingschool.com/) has been building some benches. Roubo-style benches completely outfitted with Benchcrafted vises. We're quite proud to see another woodworking school outfitting their facilities with our products. William has long been known to us as a ridiculously meticulous joiner, and the skills he's bringing to this build are something to behold.

William has been making regular posts to his Instagram page documenting he and his fellow joiners' progress. Take a look here: https://instagram.com/wnwoodworks/ for some great pics and videos.


Tuesday, September 8, 2015

What Matt Makes With Our Vises



There are moments here at Benchcrafted that make all our shortcomings and errors melt away like the morning dew. We're about to share with you one of those moments.

A few weeks ago we were contacted by a long time local customer Matt Sullenbrand asking if we'd like to stop by and see some of his handiwork.We knew Matt from several years ago when we delivered a set of vises to his shop, located at that time in the attic space of an old coach house attached to a Victorian-era brick Bed and Breakfast his in-laws were operating. Matt was working exclusively with hand tools, and had nearly finished a Roubo-style bench and was also putting the finishing touches on a very well-detailed treadle lathe. I was shocked that someone in this area was following the lead of Underhill and Follansbee. Iowa is the home of the Kreg Jig after all. (I do use my Kreg Jig, by the way!)

We knew from sporadic email contact that Matt had been dabbling in making keyboard instruments, but that was a few years ago, and most of our conversations were about tools and old machinery.

What we saw at Matt's simply stunned us. In just a few years, Matt had become a full-fledged Harpsichord maker.


This particular example was jaw dropping. We have a soft spot for musical instruments, and this one didn't disappoint.

The lower keys are made from boxwood, topped with gabon ebony, with bone caps on the upper keys. Hand printed paper decorates the key well.

The main case is made from poplar, and is pinned together with oak pegs. The underside is plainly finished, as is the outside of the rest of the instrument, which is finished with a traditional process using gesso and natural pigments. The outside is not finished to a high level of refinement, but possesses a more "working" look. It balances nicely with the highly refined key well and area of the soundboard, which is made of spruce.

Matt makes every aspect of the instrument except the jacks (the parts that hold the plectra) which are made by specialists using pear and holly wood. Traditionally, the plectra were made of horn, but nowadays acetal plastic (Delrin) is used. Unlike a piano, which uses felt-covered hammers to strike the strings, on a  Harpsichord depressing a key plucks the string, much like a lute or guitar. There is no dynamic control on a Harpsichord, you get one volume level from each key. So playing more keys sounds louder (since more strings are getting plucked.) Complex pieces generate a cacophonous, yet ordered sound from the instrument. It's a sounds that will put a smile on anyone's face.

Regrettably, I didn't take notes during our visit, so I don't remember a lot of the construction details. But if you have questions, ask them below and I'm sure Matt would be happy to answer.

Hopefully we'll make it back to see Matt's shop sometime in the future. The craft of luthiery is always a fascinating one, and there are many workholding lessons us furniture makers can learn from those who practice the craft.

Thanks Matt for the wonderful opportunity to see your work.

www.sullenbrandharpsichords.com











Monday, August 3, 2015

Sweet Bench: Small Shop Roubo by Frank Strazza



We received a quick note from Frank last week about a bench he's recently finished and is now up for sale. Outfitted with C-Series vises (for that vintage look) the bench is 66" long, 24" wide and 36" high. Frank reports the top is Euro beech, and the base is drawbored m&t eastern hard maple, built from solid 16/4 legs.

Frank's work is well known around here. It can described in one word: perfect. To see more pics of this particular bench, see Frank's blog and for more of Frank's work, see our blog post from a couple months ago.

In case you're wondering, the amount of work that goes into a shorter bench like this is no different than a longer bench. This is a bench your great grandchildren could easily be using.

Full disclosure: We don't have any special arrangement with Frank. When we catch wind of any professional bench maker doing outstanding work with our vises, we're more than happy to spread the word.




Saturday, June 20, 2015

Frank Does It Again




Watch Frank Strazza's tour of his Split Top Roubo bench we posted about a few weeks ago. Nice work Frank! And wow, what a beautiful little corner to work in. We love it.

Wednesday, June 3, 2015

Enlarge Your Holes With Cheap Tools


Two reason you may need to enlarge existing holes in your workbench.

1. You're upgrading to forged holdfasts (like our's, or those by Peter Ross or other smiths) that require a 1" hole.

2. You're benchtop is too thick for standard (e.g. Gramercy) holdfasts to get a grip, and you need to open up the bottom portion of the hole.

There are  piloted counterbores designed for metalworking that will get the job done, but they are expensive (close to $100) and you'll likely only need them once. We've had customers chuck up a 1" twist bit only to chew up their bench, ruin the hole entirely, and twist their wrist off in the process. Using twist bits to enlarge holes in a handheld drill is very dangerous. These bits are designed for drilling metal in a vise or other movement-restricted scenario. One can use a Forstner or Owl bit guided by an auxiliary board with a hole drilled in it to help the bit get started, but the process is a bit fussy, although it works well, especially with the Owl bit (the long shaft helps it run straight.) Routers can also be used, but, well, routers.

So here's a cheap and easy way to enlarge holes with tools you can get at even the worst hardware store. You probably already have 3/4" dowel and a 1" spade bit already kicking around your shop.

Here's the process for making the piloted spade bit.

First, drill a 3/4 hole dead center in a scrap block, stick the dowel in the hole, then run the block over the table saw to kerf the end of the dowel. If you don't have a table saw, cut two kerfs by hand, and pop out the web in between.



My blade was a tad wider than my spade bit, so I shimmed the kerf with (what else) masking tape. I also ground the spur point down on the bit so it would fit deeply in the kerf.


Chuck the bit into a drill, put a little epoxy in the kerf, and slide the dowel onto the bit. Center it up by eye, then turn the drill on slow and watch the dowel to make sure its spinning on center. Once you get it centered up and straight on the bit's axis, walk away. After the epoxy cures, the tool is finished.


You can use the bit to enlarge the front portion of a hole (counterbore) then if you want to make the entire hole larger, finish up with a 1" drill bit. I like the Owl bits for this. Forstners work too, but it's difficult to keep the hole straight with their short profile. Use the piloted spade bit to get as deep as you can. When using the spade bit, back out frequently to clear chips since the paddles won't pull chips out of the cut.

Tuesday, May 26, 2015

You Can't Touch This


We think it best to get one thing out of the way before continuing this post. We're not crazy about embellished workbenches. But when someone nails it, we put aside our pompous opinions, bow our heads, and retreat in humble deference to clear examples of mastery.

Frank Strazza, of Waco, Texas just sent in these pics of a workbench he just finished, less than two weeks after returning from Handworks 2015 no less, where he spent two days demonstrating his humiliatingly deft skill at turning wood into things that dazzle the eye. Frank not only managed to demo crisp marquetry and joinery, but he also managed to build three inlaid boxes at the show, all while fielding questions and wandering around the rest of the event. We're now convinced that Frank is an alien, or at least has a clone.

So, if you're in the market for a plain bench (our favorite) or an embellished one (our new favorite) contact Frank at his new website strazzafurniture.com Frank has been building our Split Top Roubo design for several years now. But we don't like to brag up our own stuff too much, so we'll let Frank close out this post:

"As I told you at Handworks, the leg vise with the crisscross has revolutionized my view of vises! After using a quick release vise for most of 20 years I find the leg vise quicker, more comfortable and much easier to use. Thank you again for making the best work holding hardware in the world!" 












Bench pics by Frank Strazza
Pics of Frank at his saw and of the box by Bartee Lamar

Thursday, April 2, 2015

After Seven Years, I Flatten My Bench


This week, after nearly seven years, I flattened the ash Roubo bench I built in 2008. If I recall correctly, I've only flattened it once after the initial session in 2008. I've flattened a lot of benches since then, but never touched this one since it didn't need it. It performed fine, especially for planing thin stuff, which should show you how much your bench is out of whack. It was still dead straight along its length, but when I set the edge of my #7 across the top, I could see about 3/32" of light right in the middle.

If you think about that for a moment, you'll realize that that's flat enough for 99.999% of your work. It really is. Why? Because I've built oodles of furniture on this bench in the past seven years, and none of the processes I use (including hand planing nearly every surface) called out for better.

So more than anything, I flattened the bench for looks and grip, since this hollow hasn't affected my work at all.

Nevertheless, here's some points worth mentioning.



Flatness isn't critical. A hollow across the width of the bench isn't a big deal. Unless you're traversing very wide and thin boards, a hollow is workable. Thicker stuff, especially hardwoods, won't deflect. You might have a problem flattening softwood boards that are 18" and wider, as they might deflect into a hollow. Still, I've done that on this bench and haven't had an issue.

Laminated tops can cup. I didn't expect this top to cup. But it did. Others I've made have not cupped to this extent. It's laminated from 8/4 flat stock, so most of the movement is in the thickness of the bench (that's mostly radial plane on the top surface) not across its width.

End caps work in thick massive tops. The end cap on this bench is strictly to accommodate the wagon vise, but it's actually done a fair amount towards keeping the top flat. In the first picture, I've made about eight passes with my #7, set for a heavy cut. On the fourth pass I was taking full width shavings across the grain about 1/4 down the top. This told me that the end cap had kept the top flat towards the end, and less so farther down the top. In fact, the opposite end of the bench was the most deeply cupped. It has no end cap. So, was the end cap keeping it flat? Or reducing moisture exchange? Probably both. So far all of you who've built benches with two end caps (even though I told you the second was unnecessary) nice move.

All work and no plane make jack a dull blade. Seven years of dust, grime, bits of steel wool, dried finish, dandruff, and skin cells from my Turkish apprentice, allow maybe three passes before the edge of a plane iron becomes a toothing blade. I sharpened five times to flatten this top. I took eleven passes total.

Traverse, and walk away. The best surface texture for a bench top is a toothy one. No, not necessarily one made by a toothing plane (although that works just fine) but the toothy surface you get from planing directly across the grain with a generous cut, and a cambered iron. When I finished this bench, the top was smooth planed because I wanted it to look like furniture. Yes, I'm guilty. But I admit the folly of  my ways. Traverse your top, let it be toothy, and your work will stay put.

No finish is the best finish. I once thought two coats of an oil varnish mix was a perfect finish for a bench top. Enough to keep it clean, that was the goal. But even that thin coat, when applied over a stupidly smooth-planed surface will burnish and polish, and make a slick, hard surface after seven years. The opposite of what you want in a bench top. I would sacrifice the convenience of not having to worry about glue and finish drips at the cost of an ideal surface any day. You can always use a drop cloth on the bench if you need to glue or finish on it. Will an unfinished bench get dirty? Yes. But that will urge you to clean it with your jointer plane. Which brings me to my next point.

Flatten your bench often. Flattening benches is not fun. Okay, maybe the first time, or after a sweet build, but never because you have to. I would rather freshen the surface once a year every year with a pass or two, than the dozen passes this bench required.

Light surfaces are best. The oil varnish on this bench had really darkened the surface. Now it looks bright and fresh, which I like. I'm always after more light, and lightness in the shop.

This bench is now ready for Handworks, where you can see it at the Sauer and Steiner booth. So now you know the real reason for my flattening session.