BLOG

Wednesday, March 25, 2015

A Case For Sharp Tools-The Lid


Now that I've been relieved of my secrecy by "the boss" I'm free to share some more about what ate up entirely too much of my December and January.

Last fall I got an email from Megan Fitzpatrick, editor of Popular Woodworking Magazine asking if I'd write for the magazine again. I of course said yes, since I not only have a personal affection for the staff at the magazine, but also because of how they treat their contributors. The past articles I've written have been published word for word, with only very minor, if any, editing (parenthetical words at the end of the sentence have their punctuation within the parentheses.) Not that I'm particularly concerned with being edited, but rather because I enjoy experiencing the voice of a particular writer almost as much as the content itself. Your experience may be different, since I wrote this article in the voice of Chewbacca.

The other reason I decided to take this project on was a complete no-brainer. Chris Schwarz asked if I'd make a fancy lid for a chest he would build, and then write about how I did it. It took me about three nanoseconds to make that decision.



The design for this lid sprung from an English chest featuring a joiner hoisting a frothy mug of ale before his bench and tools. Knowing I couldn't possibly improve on that absolutely perfect theme, I ventured off into my own territory, borrowing only the sunburst and central circle elements from the English chest.

I won't bore you with all the various iterations I played with before I settled on a final design, which didn't happen until I was nearly finished with the chest. The central circle was originally going to feature a painting of Daedalus' joiner from a famous Pompeii fresco, but Chris and I decided that as cool as that would be, something made of wood made more sense.

It wasn't until the last few weeks before the deadline that I decided on the carved montage of tools. Inspiration for this came from a 17th century Dutch joiner's guild coin, a carved marble panel of an absolute mess of tools, and strong urging from Chris.

The tools themselves are not just representative of craftsmanship in general, but are modeled after actual tools from my kit. The dividers were a Christmas gift from my family, a hand-forged set from blacksmith Seth Gould. The backsaw is an Eccentric Toolworks dovetail saw that was gifted to me by a dear friend. And the chisels are taken from engravings from l'Art du Menuisier, my favorite woodworking book. As with most woodworkers, hand-cut dovetails hold a special importance for me, so the tools reflect that.

This project is sort of like taking a steam roller to an oud. Lots of similar design elements, albeit on the flat plane. I'm okay with building this stuff in three dimensions, but for some reason laying it up on a solid panel had me scratching my head a bit. Not about the process, but more about the substrate. I cover the process of building a bomb-proof, stable, lightweight, nail-grabbing panel out of solid wood that has all the benefits, but none of the drawbacks of commercial ply. It's cool stuff.

And that reminds me that I have a few people to thank for helping me along the way.

Bill Thomas
Bill is one of the finest woodworkers I've never met. I've followed his work for a few years now, all online. If you want to see an absolute tour de force of woodworking technique, check out his Georgian Secretary build at the OWWM Woodworking forum.

Patrick Edwards
Yes, that one. The master.

Chris Schwarz
I haven't done too many joint projects in my time, but this has been the best. Chris gave me more or less free reign over the design. And he didn't balk one iota when I decided the lid looked too long for its width. He trashed the first dovetailed carcase and started fresh just for me.

Peter Ross
Peter was excellent to work with (as usual). I usually mate up work like this with highly refined hardware (polished brass or stainless). Not anymore. I think the crisp and rigid parquetry of the lid looks simply incredible with Peter's hand-forged wrought-iron work. The finish on the hinges and crab lock are right off the hammer and file, no polishing or further refinement. They look perfect with the lid. Perfect.

Raney Nelson
When I was in the throes of this project, and its looming deadline, Raney provided an excellent coalescing mechanism for some crazy ideas I had floating around. He also provided me with the excellent, infill-grade kingwood and boxwood I used for the backgrounds and tool montage.

Jon Fiant
That's your macassar ebony Jon, thanks again.

Before you ask me how many hours I have in the lid, know that I'm blissfully ignorant of that number. I think if I really knew how many late nights, weekends, early morning and "days off" I have in this, I would likely wretch. Still, it doesn't stop me from designing the next one in my head.

Chris' article on the chest comes out in the August issue, my bit in the following, October issue.

If you want to see this chest, I plan to have it in the Benchcrafted booth at Handworks on May 15-16.




16 comments:

  1. Hi,
    this is amazing. I like the 3D effect of the carvings. That is so cool.
    I'm really curious to read about the making.

    Cheers,
    Stefan

    ReplyDelete
  2. "Chris Schwarz
    I haven't done too many joint projects in my time, but this has been the best. Chris gave me more or less free reign over the design. And he didn't balk one iota when I decided the lid looked too long for its width. He trashed the first dovetailed carcase and started fresh just for me."

    That is a COMPLETE lie. And I have the e-mail chain to prove it. I doubled poor Jameel's time on this project by rebuilding the carcase with different proportions.

    BTW, and unrelated, does anyone need a coffin for an oompa-loompah? Cheap....

    ReplyDelete
    Replies
    1. ...or about 10" of beech and maple sunburst? Really, really cheap!

      Delete
    2. The burning question is: what did Schwarz say when you didn't clock the screws on the saw?

      Delete
    3. He's so good that he clocked the screws when I sent him the lid.

      Delete
    4. I have an ailing oompa-loompah. It would come in handy when... well you know.

      Delete
  3. Really, really cool. I like the thought behind what you included in the design.
    Question: If Megan hadn't approached you and it wasn't a collaboration with Chris, would you have sacrificed the time to embellished a lid for a toolbox you were building for yourself?

    ReplyDelete
    Replies
    1. Probably not. But now that it's done, I probably would, if that makes sense.

      Delete
  4. Yup, perfect sense. Enjoy.

    ReplyDelete
  5. Simply stunning work. Truly a work of art. Love the 3d effect. Years from now, long after we are all dead, someone will write a book on the tool chest of Chris and Jameel :-)

    ReplyDelete
  6. You lie! I sometimes add a comma, too. (I'm so very glad you did this, and honored to be publishing it.)

    ReplyDelete
  7. Wonderful work and I have to wonder if some of H.O. Studley Masonic Lodge iconography also influenced your design? You cited the magazine cover, but the final product reminds me of a Masonic Lodge hall, and Studley was a Mason. Perhaps I'm stretching this too far?

    ReplyDelete
    Replies
    1. Some of the design history will come out in the article extras. Dividers and tool montages were used by carpenter's guilds as much as or more than by Masons.

      Delete
  8. The Macassar was put to great use Jameel. Glad it ended up with you! I know a plane maker that is kind of fond of the stuff too.

    ReplyDelete
  9. Big-Ups!
    Those carvings are bonkers! I think the only thing missing is the mug of ale, or at least a pair of tallboys!

    ReplyDelete

Note: Only a member of this blog may post a comment.