Thursday, June 4, 2015

Limited Run Mag-Bloks

Back when cocobolo wasn't on the CITES list, a couple times a year we'd do a batch of One-of-a-Kind Mag-Bloks, in various sizes.  We'd also do any other exotics we could get our hands on that we're interesting.

We've not done that for some time, we simply don't have the time.  What we do have the time for though are slightly less exotic woods, in standard sizes in limited runs.

What we have now are, as pictured top to bottom, Wenge, Quartered Oak, Bocote & Padauk.



Unlike in the past when we've posted individual photos of each blok, mostly for character and grain reference, these species are all fairly consistent in variation so we're not going to do that.

Prices are, plus shipping:

Wenge
12":  $41.00
18":  $54.00

Quartered Oak
12":  $35.00
18":  $48.00

Bocote
12":  $48.00
18":  $60.00

Padauk
12":  $38.00
18":  $51.00

We have a handful of each of these.  To order, send an email to info@benchcrafted.com and include your shipping address. We'll send you an invoice to pay. Simple as that.  ALL SOLD OUT.

Wednesday, June 3, 2015

Enlarge Your Holes With Cheap Tools


Two reason you may need to enlarge existing holes in your workbench.

1. You're upgrading to forged holdfasts (like our's, or those by Peter Ross or other smiths) that require a 1" hole.

2. You're benchtop is too thick for standard (e.g. Gramercy) holdfasts to get a grip, and you need to open up the bottom portion of the hole.

There are  piloted counterbores designed for metalworking that will get the job done, but they are expensive (close to $100) and you'll likely only need them once. We've had customers chuck up a 1" twist bit only to chew up their bench, ruin the hole entirely, and twist their wrist off in the process. Using twist bits to enlarge holes in a handheld drill is very dangerous. These bits are designed for drilling metal in a vise or other movement-restricted scenario. One can use a Forstner or Owl bit guided by an auxiliary board with a hole drilled in it to help the bit get started, but the process is a bit fussy, although it works well, especially with the Owl bit (the long shaft helps it run straight.) Routers can also be used, but, well, routers.

So here's a cheap and easy way to enlarge holes with tools you can get at even the worst hardware store. You probably already have 3/4" dowel and a 1" spade bit already kicking around your shop.

Here's the process for making the piloted spade bit.

First, drill a 3/4 hole dead center in a scrap block, stick the dowel in the hole, then run the block over the table saw to kerf the end of the dowel. If you don't have a table saw, cut two kerfs by hand, and pop out the web in between.



My blade was a tad wider than my spade bit, so I shimmed the kerf with (what else) masking tape. I also ground the spur point down on the bit so it would fit deeply in the kerf.


Chuck the bit into a drill, put a little epoxy in the kerf, and slide the dowel onto the bit. Center it up by eye, then turn the drill on slow and watch the dowel to make sure its spinning on center. Once you get it centered up and straight on the bit's axis, walk away. After the epoxy cures, the tool is finished.


You can use the bit to enlarge the front portion of a hole (counterbore) then if you want to make the entire hole larger, finish up with a 1" drill bit. I like the Owl bits for this. Forstners work too, but it's difficult to keep the hole straight with their short profile. Use the piloted spade bit to get as deep as you can. When using the spade bit, back out frequently to clear chips since the paddles won't pull chips out of the cut.

Tuesday, June 2, 2015

La Forge Miter Jack-Sketchup Drawing Update


Thanks to an attentive customer we discovered a couple missing parts in the Sketchup drawing for the La Forge Royale Miter Jack.

First, the fixed jaw runners were missing from the exploded view. We've added those to the drawing, along with the red, grain-direction arrows.

Second, the runners for the half-miter jaw were missing entirely. We've added those to both the assembled jack and the exploded one.

On the original jack, the runners were simply attached to the half miter jaw with small brads. It's a good idea on the other jaws too, in case they need to be removed for maintenance or repair.

To download the latest SU drawing, click here.

Video Tour of My Tool Chest


Schwarz just posted a neat little video on the chest he and I built together earlier this year. Take a look at his blog over at Popular Woodworking Magazine where the chest will be featured in a two-part article beginning in the next issue.

Friday, May 29, 2015

Building The La Forge Royale Miter Jack - Step by Step guide


We've had a few requests for build plans for our Miter Jack.  As a limited run item, we eschewed written plans for this build and instead posted blog entries detailing the build.

Unfortunately Blogger doesn't let you show search results in chronological order, so here they are:

Sketchup Drawing for the La Forge Royale Miter Jack

Building The La Forge Royale Miter Jack - Body Dims

Building The La Forge Royale Miter Jack- Part 1

Building The La Forge Royale Miter Jack- Part 2

Building The La Forge Royale Miter Jack- Part 3

Building The La Forge Royale Miter Jack- Part 4

Building The La Forge Royale Miter Jack- Part 5

Building The La Forge Royale Miter Jack- Part 6

Building The La Forge Royale Miter Jack- Part 7

You Don't Know Jack. Get To Know Jack.

To see everything we've posted about the jack, click here. Clicking on "La Forge Royale Miter Jack" under categories on the right side of the blog will get you to the same place. 

Thursday, May 28, 2015

Looking Back On The Studley Exhibit



Thursday night before the big Handworks/Studley weekend I had the opportunity to see the Studley Exhibit at a special gathering just for Handworks Exhibitors. It was very kind of Don Williams to open the exhibit just for us toolmakers. But after a long day, I was pretty well spent, so I walked through the exhibit sort of quickly, then headed home. I had seen the ensemble a couple years ago in Studleyville, so I was primarily there to see Don's handywork in designing the exhibit. I didn't get to do that on Thursday night due to the crowd. So I went back Sunday evening during the last viewing slot.

It was a case of "you snooze, you win".

The last few slots on Sunday were pretty empty, so Don broke all his rules, let everyone stay as long as they wanted, and started taking stuff out of the chest, just short of passing tools around to the remaining attendees.


I sat on one of the long benches in the room and enjoyed watching Don share his love of Studley with equally enthusiastic onlookers. It was a great cap to a fantastic weekend. I can imagine Don was pretty well wiped out Sunday around 5pm, but you wouldn't know it. He took Studley's Bailey #1 from it's ebony archway with as much enthusiasm as the first time he'd done it, I imagine. It was a real special treat for everyone in the room. Then more tools and even some of Studley's special racks came out. It was very very cool.

If you missed out on Studley for silly reasons like ticket price, I pity you. This exhibit was as much about sharing a common interest and genuine community as it was about Studley. And that's what made it special. Seeing the chest in a static presentation with a bunch of strangers is one thing, but the difference here was that Don personally engaged every viewer for three solid days. Hats off, and thanks to The Don.

For a  backstage pass on how the exhibit happened, and its aftermath, check out Don's blog, where he's been posting about the ins and outs of the exhibit.

Classic Leg Vise - Check Your Groove Pins



We discovered an incorrect part in the hardware packs included with Classic Leg Vises. You may have the correct pin, only a few vises were shipped out with the wrong part. We're not entirely sure when this crept in, but nevertheless, here's how to address it.

To join the screw's shaft to the vise's hub, a steel groove pin is inserted into the hub which passes through the shaft and into the other side of the hub. The incorrect groove pin is pictured below.

Type A Groove Pin

The grooves on this pin (its a type A pin) run the entire length. So when you insert the pin into the hub, it starts grabbing right away, preventing you from feeling whether the end is lining up, and inserting properly into the screw's shaft. This can cause you to garf up the pin, the hub, and the shaft. 

This is why we use the correct Type C groove pin, pictured below.

Type C Groove Pin

The groove on the type C pin only extends only 1/4 the length of the pin. This allows you to insert the pin nearly all the way into the hub before it bites, and (this is important) allow you to feel the end of the pin engage the hole in the screw's shaft. Then you tap the pin in firmly to complete the assembly.

It is possible to use the Type A pin with success, but it will be fussy. That said, if you have a Type A pin and would like a Type C, drop us a line via email and we'll get one in the mail to you. If you ordered a Classic in the last few days, you'll be getting the correct pin.




Tuesday, May 26, 2015

You Can't Touch This


We think it best to get one thing out of the way before continuing this post. We're not crazy about embellished workbenches. But when someone nails it, we put aside our pompous opinions, bow our heads, and retreat in humble deference to clear examples of mastery.

Frank Strazza, of Waco, Texas just sent in these pics of a workbench he just finished, less than two weeks after returning from Handworks 2015 no less, where he spent two days demonstrating his humiliatingly deft skill at turning wood into things that dazzle the eye. Frank not only managed to demo crisp marquetry and joinery, but he also managed to build three inlaid boxes at the show, all while fielding questions and wandering around the rest of the event. We're now convinced that Frank is an alien, or at least has a clone.

So, if you're in the market for a plain bench (our favorite) or an embellished one (our new favorite) contact Frank at his new website strazzafurniture.com Frank has been building our Split Top Roubo design for several years now. But we don't like to brag up our own stuff too much, so we'll let Frank close out this post:

"As I told you at Handworks, the leg vise with the crisscross has revolutionized my view of vises! After using a quick release vise for most of 20 years I find the leg vise quicker, more comfortable and much easier to use. Thank you again for making the best work holding hardware in the world!" 












Bench pics by Frank Strazza
Pics of Frank at his saw and of the box by Bartee Lamar

Monday, May 25, 2015

Another Miter Jack Surfaces


Last weekend at Handworks we were able to pick up another miter jack from the La Forge Royale firm. Like the jack we posted about last year, this one was also made during the Lemainque period at Forge Royale in Paris. The medallion on this version is quite different than the more typical lion-encrusted one from our other items from the company. This jack is nearly identical in every other way. A customer of ours picked this up in a Michigan antique store. Amazing.

Incidentally, we still have a few miter jack kits left, which you can order directly from our store page. We likely won't produce these again, so you might want to get one while you can, even if you don't have plans to make one in the near future.







Thursday, May 21, 2015

Handworks 2015 - The Video




Here it is. The video we took of Roy's talk Saturday Morning at Handworks 2015.
Cameramen: John Abraham, George Abraham